博文
[J-2012]Effect of Cutting Speed on Surface Integrity in High
|||
Materials Science Forum Vols. 697-698 (2012) pp 208-212
Effect of Cutting Speed on Surface Integrity in High Speed Machining Nickel-Based Superalloy Inconel 718
Z.Q. Liu, C.M. Cao, J. Du and Z.Y. Shi
Z.Q. Liu, C.M. Cao, J. Du and Z.Y. Shi
Abstract. Surface integrity is becoming important to satisfy the increasing requirements service life of machined parts. The purpose of this study is to investigate the effects of cutting speeds on surface integrity of Inconel 718. Experiments are conducted on a CNC machining center under various cutting speeds. The machined surface integrity is evaluated in terms of surface roughness, microhardness and residual stress. Experimental results show that machined surface integrity of Inconel 718 is sensitivity to the variations of cutting speeds. The surface roughness firstly increases with the cutting speeds increasing at the range from 50 m/min to 200 m/min, then decreases with the further increasing of the cutting speeds. For microhardness, it can be seen that work-hardening for the machined surface is serious. The surface residual stresses are tensile ones at the range of the selected cutting speeds from 50 m/min to 3,000 m/min in this research.
Keywords: Inconel 718, Superalloy, Surface integrity, High speed machining
2012-Effect of Cutting Speed on Surface Integrity in High Speed Machining Nickel.pdf
https://m.sciencenet.cn/blog-256695-511780.html
上一篇：[J-2011] J-C本构参数对绝热剪切影响的敏感性分析
下一篇：[C-2011]Numerical Modeling of Minimum Uncut Chip
扫一扫，分享此博文
全部作者的其他最新博文
- • [J-2014] 镍基粉末高温合金切削加工表面白层形成热-力耦合作用
- • [J-2014] Investigations on the chip formation mechanism
- • 贺艾兴院士从教六十五周年《艾兴学术论文选集》-后记
- • [J-2014] Subdivision of chatter-free regions and optimal cut
- • [J-2014] Serrated chipformation mechanism based on mixed
- • [J-2014] Influence of Chatter on Machining Distortion