Flowchart Symbols Defined: Flowchart Symbols and Their Meanings

By Nicholas Hebb

The following is a basic overview, with descriptions and meanings, of the most common flowchart symbols - also commonly called flow chart shapes, process flow diagram symbols or business process map symbols, depending upon what type of flow diagram you're creating. The table below lists the flowchart symbol drawing, the name of the flowchart symbol in Microsoft Office, and a short description of where and how the flowchart symbol is used.

Table of Flowchart Symbols

(aka, Flowchart Shapes, Business Process Map Symbols)

Caveat: The descriptions given below are written from the perspective of someone using them to create process flow charts, whereas many of the flowchart symbols actually have their roots in the data processing diagrams and programming flow charts. So, not all the flowcharting shapes shown below may be relevant to your needs.

The flowchart symbol names in parentheses are common alternates for a given shape. Sometimes a flowchart shape can have more than one meaning, as with the Circle shape, which depicts a jump node in flow charts and inspection point in business process mapping. Other times, there are just multiple names for the same flow chart symbol - such as Terminator and Terminal Point.

Color code
 

Symbol	Symbol Name (Alternate Shape Name)	Symbol Description
Process / Operation Symbols
	Process	Show a Process or action step. This is the most common symbol in both process flowcharts and business process maps.
	Predefined Process (Subroutine)	A Predefined Process symbol is a marker for another process step or series of process flow steps that are formally defined elsewhere. This shape commonly depicts sub-processes (or subroutines in programming flowcharts). If the sub-process is considered "known" but not actually defined in a process procedure, work instruction, or some other process flowchart or documentation, then it is best not to use this symbol since it implies a formally defined process.
	Alternate Process	As the shape name suggests, this flowchart symbol is used when the process flow step is an alternate to the normal process step. Flow lines into an alternate process flow step are typically dashed.
	Delay	The Delay flowchart symbol depicts any waiting period that is part of a process. Delay shapes are common in process mapping.
	Preparation	As the names states, any process step that is a Preparation process flow step, such as a set-up operation.
	Manual Operation	Manual Operations flowchart shapes show which process steps are not automated. In data processing flowcharts, this data flow shape indicates a looping operation along with a loop limit symbol (which is not supported by Microsoft Office, but a Manual Operation symbol rotated 180° will do the trick.)
Branching and Control of Flow Symbols
	Flow Line (Arrow, Connector)	Flow line connectors show the direction that the process flows.
	Terminator (Terminal Point, Oval)	Terminators show the start and stop points in a process. When used as a Start symbol, terminators depict a trigger action that sets the process flow into motion.
	Decision	Indicates a question or branch in the process flow. Typically, a Decision  flowchart shape is used when there are 2 options (Yes/No, No/No-Go, etc.)
	Connector (Inspection)	Flowchart: In flowcharts, this symbol is typically small and is used as a Connector to show a jump from one point in the process flow to another. Connectors are usually labeled with capital letters (A, B, AA) to show matching jump points. They are handy for avoiding flow lines that cross other shapes and flow lines. They are also handy for jumping to and from a sub-processes defined in a separate area than the main flowchart. Process Mapping: In process maps, this symbol is full sized and shows an Inspection point in the process flow. [Just to confuse things further, some people will use a circle to indicate an operation and a square to indicate an inspection. That's why it's important to include a symbol key in the flowchart.]
	Off-Page Connector	Off-Page Connector shows continuation of a process flowchart onto another page. When using them in conjunction with Connectors, it's best to differentiate the labels, e.g. use numbers for Off-Page Connectors and capital letters for Connectors. In actual practice, most flowcharts just use the Connect shape for both on-page and off-page references.
	Merge (Storage)	Flowchart: Shows the merging of multiple processes or information into one. Process Mapping: commonly indicates storage of raw materials.
	Extract (Measurement)	Flowchart: Shows when a process plits into parallel paths. Also commonly indicates a Measurement, with a capital 'M' inside the symbol. Process Mapping: commonly indicates storage of finished goods.
	Or	The logical Or symbol shows when a process diverges - usually for more than 2 branches. When using this symbol, it is important to label the out-going flow lines to indicate the criteria to follow each branch.
	Summing Junction	The logical Summing Junction flowchart shape is shows when multiple branches converge into a single process. The merge symbol is more common for this use, though. This symbol and the Or symbol are really more relevant in data processing flow diagrams than in process flowcharts.
Input and Output Symbols
	Data (I/O)	The Data flowchart shape indicates inputs to and outputs from a process. As such, the shape is more often referred to as an I/O shape than a Data shape.
	Document	Pretty self explanatory - the Document flowchart symbol is for a process step that produces a document.
	Multi-Document	Same as Document, except, well, multiple documents. This shape is not as commonly used as the Document flowchart shape, even when multiple documents are implied.
	Display	Indicates a process step where information is displayed to a person (e.g., PC user, machine operator).
	Manual Input	Manual Input flowchart shapes show process steps where the operator/ user is prompted for information that must be manually input into a system.
	Card	This is the companion to the punched tape flowchart shapes. This shape is seldom used.
	Punched Tape	If you're very good at stretching all the life out of a machine, you may still have use for the Punched Tape symbol - used for input into old computers and CNC machines.
File and Information Storage Symbols
	Stored Data	A general Data Storage flowchart shape used for any process step that stores data (as opposed to the more specific shapes to follow next in this table).
	Magnetic Disk (Database)	The most universally recognizable symbol for a data storage location, this flowchart shape depicts a database.
	Direct Access Storage	Direct Access Storage is a fancy way of saying Hard Drive.
	Internal Storage	Used in programming flowcharts to mean information stored in memory, as opposed to on a file.
	Sequential Access Storage (Magnetic Tape)	Although it looks like a 'Q', the symbol is supposed to look like a reel of tape.
Data Processing Symbols
	Collate	The Collate flowchart shape indicates a process step that requires organizing data, information, or materials according into a standard format or arrangement.
	Sort	Indicates the sorting of data, information, materials into some pre-defined order.

The 4 Most Commonly used Flowchart Symbols

The vast majority of flowcharts rely on just 4 of the process symbols to do all the heavy lifting: Terminator, Process, Decision, and Connector. In fact, if you use other flowcharting shapes, many people won't know what they are for, so you should probably add a shape symbol key to your flowchart.

About the Flowchart Symbols

You might think that an expensive flowchart software package is required to make presentation-quality flowcharts. It isn't. All the shapes used in this article were created in Microsoft Excel, complete with the softened outlines, gradient fills, and drop shadows.

---

About the Author

Nicholas Hebb is the founder of BreezeTree Software, maker of FlowBreeze Flowchart Software.

转载本文请联系原作者获取授权，同时请注明本文来自王正全科学网博客。
链接地址：https://m.sciencenet.cn/blog-230403-257544.html

上一篇：IC50 versus EC50
下一篇：体质酸碱性与饮食，防癌健康－转自百度知道